Si tienen alguna duda o consulta por favor enviar mensaje privado.
Muchas gracias
José Rivas - Equipo de www.yoreparo.com
CIRCUITO INTEGRADO Comercial Electronica S.R.L Cometronica S.A comercialelectronicasrl@gmail.com whatsapp 2613837093
viernes, 25 de noviembre de 2022
miércoles, 16 de noviembre de 2022
jueves, 20 de octubre de 2022
Control Remoto Para Desarrollos De Audio Código Ll-1261-ef
Descripción
CONTROL REMOTO PARA DESARROLLOS DE AUDIO
sistema económico para el control remoto de periféricos.
La idea es que mediante luz infrarroja podamos transmitir información y, en función de esta, actúe un receptor. El control de infrarrojo, que es bastante fácil y económico, puede enriquecer todas nuestras aplicaciones electrónicas.
ESTE MANDO A DISTANCIA PRECISA PARA SU FUNVIONAMIENTO DE UNA PILA 2025 NO INCLUIDA EN EL KIT ,DEBE COLOCARSE SEGUN FOTO2 EN LA PARTE POSTERIOR DE LA CARCASA DEL MISMO
CÓDIGOS de ERROR Aire Acondicionados
CÓDIGOS de ERROR Aire Acondicionados
Para los equipos split que traen este control remoto.
Señal H1 en la pantalla del control remoto
• Esta función de descongelamiento se presenta en otras referencias de aires que poseen unidad de calefacción.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------
LG
-------------------------------------------------------------------------------------------------------
Coventry - Electra
---------------------------------------------------------------------------------------------------------------
Descripción de fallas o comportamiento de protección (BGH)
BGH INVERTER SMART
_____________________________________________________________________________
ECOX
Codigos de Error y Procedimientos
Tabla de errores de Serie Inverter
_______________________________________
Descarga Aqui
_________________________________
__________________________________
Códigos Electra
Codigos Hitachi, TCL, Kelvinator, RCA, Daewoo
----------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
HISENSE
Otras Marcas sin display
Surrey
Algunos modelos Inverter
-----------------------------------------------------------------------------------------------------------------
Lennox
---------------------------------------------------------------------------------------------------------------
MIRAGE
Otros Manuales Aqui
-----------------------------------------------------------
Mitsubishi
------------------------------------------------------------
Sanyo Inverter
Sanyo
Codigos error Sanyo Splits y VRF
Ver todos los codigos Aqui
__________________________________________________
Toshiba
Daikin
Codigos de autodiagnostico Aqui. Se hace con el control remoto
Panasonic
__________________________________________________________________
AUTODIAGNÓSTICO DE AVERÍAS EN EQUIPOS INVERTER DOMÉSTICOS PANASONIC
-----------------------------------------------------------------------------------------------------------
Samsung Multi split
Samsung
Samsung
Diagnostico de fallas Ver Aqui
---------------------------------------------------------------------------------------------------------------
* York *
Codigo de falla F6
Diagnostico = Falla del PG del forzador interior (Efecto Hall) Posiblemente el motor gire lento debido a envejecimiento del capacitor.
Codigo de falla F7
Diagnostico = Falla de sensor de temperatura de ambiente. (Room)
Codigo de falla F8
Diagnostico = Falla de sensor de serpentina (Pozo) en evaporador. (Coil)
Codigo de falla F9
Diagnostico = Falla de sensor de serpentina de unidad exterior.(Coil)
------------------------------------------------------------------------------------------------------------------------------------------------------------------
York VRF
--------------------------------------------------------------------------------------------
Midea air conditioner error codes
Indoor unit error code explanation:
R series:
| DISPLAY | MALFUNCTION |
|---|---|
| E0 | EEPROM parameter error |
| E1 | Indoor / outdoor units communication protection |
| E2 | Zero-crossing signal error |
| E3 | Fan speed out of control |
| E5 | Open or short circuit of outdoor temperature sensor |
| E6 | Open or short circuit of room or evaporator temperature sensor |
| P0 | IGBT over-strong current protection |
| P1 | Over voltage or too under voltage protection |
| P2 | Temperature protection of compressor top. |
| P4 | Inverter compressor drive error |
9V series
| NO. | MALFUNCTION | DEF | TIMER | AUTO | RUN | DISPLAY DIGITAL TUBE |
|---|---|---|---|---|---|---|
| 1 | EEPROM error | o | o | o | o | E0 |
| 2 | Indoor / outdoor units communication protection | * | * | * | * | E1 |
| 3 | Zero-crossing signal error | o | o | * | * | E2 |
| 4 | Indoor fan speed out of control | o | o | * | * | E3 |
| 5 | Outdoor unit temp. sensor or connector of temp. sensor is defective | x | o | x | * | E5 |
| 6 | Open or short circuit of room or evaporator temperature | o | o | o | * | E6 |
| 7 | Outdoor fan speed out of control | o | o | * | * | E7 |
| 8 | IBM malfunction or IGBT over-strong current protection | x | x | o | * | P0 |
| 9 | Over voltage or too under voltage protection | x | o | o | * | P1 |
| 10 | Temperature protection of compressor top. | o | x | x | * | P2 |
| 11 | Compressor position protection | o | x | * | * | P4 |
| 12 | Inverter module protection | x | o | * | * | P5 |
* Flash (at 0.5Hz, P5 at 0.25Hz) o light x （off）
9A series
| NO. | MALFUNCTION | DEF | TIMER | AUTO | RUN | DISPLAY DIGITAL TUBE |
|---|---|---|---|---|---|---|
| 1 | EEPROM error | o | o | o | o | E0 |
| 2 | Indoor / outdoor units communication protection | * | * | * | * | E1 |
| 3 | Zero-crossing signal error | o | o | * | * | E2 |
| 4 | Indoor fan speed out of control | o | o | * | * | E3 |
| 5 | Outdoor unit temp. sensor or connector of temp. sensor is defective | x | o | x | * | E5 |
| 6 | Open or short circuit of room or evaporator temperature | o | o | o | * | E6 |
| 7 | Outdoor fan speed out of control | * | o | * | * | E7 |
| 8 | IBM malfunction or IGBT over-strong current protection | x | x | o | * | P0 |
| 9 | Over voltage or too under voltage protection | x | o | o | * | P1 |
| 10 | Temperature protection of compressor top. | o | x | x | * | P2 |
| 11 | Compressor position protection | o | x | * | * | P4 |
| 12 | Inverter module protection | x | o | * | * | P5 |
* Flash (at 0.5Hz, P5 at 0.25Hz) o light x （off）
Cassette/Ceiling&Floor series:
| OPERATION | TIMER | DE-FROST | ALARM | LED STATUS |
|---|---|---|---|---|
| * | x | x | x | Indoor room temp. sensor open or short-circuit |
| x | x | * | x | Indoor pipe temp. sensor open or short-circuit |
| x | * | x | x | Indoor and outdoor communication error |
| x | x | x | * | Water level alarm |
| * | * | x | x | EEPROM error |
| * | x | x | o | Inverter module protection |
| * | o | x | x | Outdoor sensor open or short circuit |
| * | o | x | o | Outdoor voltage protection |
| * | x | o | x | Compressor top temp. protection |
| * | x | o | o | Mode conflict |
| * | x | * | * | Outdoor current protection |
* flash, o light, x extinguished
Outdoor unit error code explanation:
For units (except M5OA-36HRDN1-Q model)
| DISPLAY | LED STATUS |
|---|---|
| E0 | EEPROM error |
| E1 | No A Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| E2 | No B Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| E3 | No C Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| E6 | No D Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| E4 | Outdoor unit temp. sensor or connector of temp. sensor is defective |
| E5 | Compressor voltage protection |
| E7 | Communication malfunction between outdoor main chip and compressor control chip |
| P0 | Temperature protection of compressor discharge or compressor top. For M4OC-36HRDN1-Q,it only means compressor discharge temp.protection. |
| P1 | High pressure protection(only for M4OC1-27HRDN1-Q, M4OC-36HRDN1-Q) |
| P2 | Low pressure protection(only for M4OC1-27HRDN1-Q, M4OC-36HRDN1-Q) |
| P3 | Compressor current protection |
| P4 | Inverter module protection |
| P6 | Condenser high-temperature protection |
For M5OA-36HRDN1-Q model
| DISPLAY | LED STATUS |
|---|---|
| E0 | EEPROM error |
| E1 | No A Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| E2 | Communication malfunction between outdoor unit and indoor units |
| E3 | Communication malfunction between outdoor main chip and compressor control chip |
| E4 | Outdoor unit temp. sensor or connector of temp. sensor is defective |
| E5 | Compressor voltage protection |
| E6 | PFC module protection |
| P0 | Compressor top. temperature protection |
| P1 | High pressure protection |
| P2 | Low pressure protection |
| P3 | Compressor current protection |
| P4 | Compressor discharge high-temperature protection |
| P5 | Condenser high-temperature protection |
| P6 | Inverter module protection |
| F1 | No A Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| F2 | No B Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| F3 | No C Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| F4 | No D Indoor unit coil outlet temp. sensor or connector of sensor is defective |
| F5 | No E Indoor unit coil outlet temp. sensor or connector of sensor is defective |
Midea Codigos Inverter
Carrier
__________________________________________________
General Electric
__________________________________________________
Electrolux
Modelos:
EXH09HL1W - EXH12HL1W - EPH09MLIW - EPH12MLIW
C5: Avería del puente del conector.
Asegúrese de que el puente del conector hace contacto correctamente. Si fuera necesario, cambie la placa de circuitos antigua por una nueva.
F1: Avería del sensor de temperatura ambiente interior.
Asegúrese de que el sensor de temperatura ambiente interior.
F2: Avería del sensor de temperatura del evaporador.
Asegúrese de que el sensor de temperatura del evaporador está correctamente conectado.
Electrolux - Conqueror - BGH
---------------------------------------------------------------------------------
Westinghouse
Error en placas universales
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Codigos de Error por Parpadeo Luminico AQUI
--------------------------------------------------------------------------------
Comentar es agradecer
Suscribirse a:
Entradas (Atom)
Calculadora de código de colores de resistencias de 5 bandas
Esta herramienta se utiliza para decodificar información para las resistencias con conductores axiales en una banda de colores. Seleccione...
-
CS8509 (Ultra bajo EMI, Clase AB / Clase D IC de amplificador de potencia de audio mono de 8W) Resumen El CS8509E es un amplificad... -
CS8508E CS8508 8 W amplificador de Audio chip IC SMD SOP8 nuevo Modelo de reemplazo cs8508e 2019-05-26 16:57 Alternativa... -
KSP2222A El KSP2222A se fabrica en una caja de plástico TO-92 . Al mirar el la...